Register Face and Finger ID Templates in BioLook

This article will walk you through registering face and finger ID templates on your new BioLook timeclock.  You can use the links below to skip to a specific section of this article. 

Register Face and Finger ID Templates

• Face Registration
• Finger ID Registration

Register Face and Finger ID Templates

Face Registration

To register face templates on the time clock, follow these steps:

1. Press [Menu], select User Mgt and press [OK]
2. Select User View and press [OK]
3. Select the specific employee and press [OK]
4. Select Edit and press [OK]
5. Select Face and press [OK]
   
   • The time clock will request the user to look at the camera to position their face inside the guide marks, gently move to capture the user’s right side and left side, lower their head, and look up.
6. When the registration is completed, the time clock will return to the previous screen
7. When finished, press [ESC] once and then press [OK] to save the face template
8. Repeat steps 3-7 to register face templates for additional employees
9. When finished, press [ESC] repeatedly to exit the menus or simply allow the menus to timeout

Finger ID Registration

To register finger ID templates on the time clock, follow these steps:

1. Press [Menu], select User Mgt and press [OK]
2. Select User View and press [OK]
3. Select the specific employee and press [OK]
4. Select Edit and press [OK]
5. Select FP and press [OK]
   
   • The time clock will request the user to press a finger (press and release quickly for best results) to the finger sensor 3 times.
6. When the registration is completed, the clock will return to the previous screen
7. If you wish to register more than one finger for an employee, simply select FP and press [OK] again and follow the prompts on the clock
8. When finished, press [ESC] once and
   then press [OK] to save the finger ID template
9. Repeat steps 3-7 to register finger ID templates for additional employees
10. When finished, press [ESC] repeatedly to exit the menus or simply allow the menus to timeout